What is a RotoCut good for?

The RotoCut thermal compass cutter is designed for civil construction applications. It is an ideal complement to typical thermal cutters available on the market.

The compass cutter uses a resistance wire, heated to 800°C (1472 F), to cut curved elements in materials of up to 130 kg/m3 density. The digitally controlled motion of the heated wire causes the surrounding material to vaporize, producing a precise and even cut.
Any shape you can imagine. The forming wire (1.5 mm thick) is capable of producing an incredible variety of shapes. Shapes created with this method can have any kind of notches, curves, angles, or even cavities. Shaping can be applied to nearly 360 degrees of the outer surface of elements.
The ability to create curves of a predefined radius is unique among thermal plotters available today. Using RotoCut you can create curved elements as large as 5 m (16.4 ft) in diameter with a very high precision. The cutting implement leaves no visible marks in the material. The simple design of the device ensures that the cutting process runs at a high speed, and can be applied to nearly 360 degrees of the element's surface.
The cutter works at a linear speed of 100 cm (3.2 ft) per minute, in both automatic and manual control modes. The fast and efficient process also ensures high quality and precision of curved shapes.

Forming wire (diameter 0,9 mm) allows to obtain incredible effects during material cutting with given shape.

• 1,5 mm thick hot wire
  
• max. length of wire: 50 cm
• vertical size 100 - 500 mm
• 360° cutting
• linear cutting speed 100 cm/min
• controller unit & contoll SW included
• max diameter: 5 m

The RotoCut thermal compass foamcutter vailable in one size only, however that can cut a curve as big in diameter as 5 m.

• masonry decoration above entrance doors
  
• arches
• boltív díszítés
• íves habdekoráció

A RotoCut a ThermoCUT hablemezvágó berendezés vagy más feszített izzószálas habvágó hasznos kiegészítője lehet.